Hello, Ithink a mada a damn misstake while flashing my Xperia S. I Vorgot to check the debugging mode befoer using the flasher. While starting the flashing process the Flasher gives the error massage that no acces is possible and the phon is stunned while changing from black display (no back ligth) to sony logo to black display (but the back ligth is on) and than starts again. i am not abel to break the routine! if I connect the phone to my pc (USB) the phon cant be detectet because while this process the phone is disconectet from the pc for short time. I cand find any halp with search function ... pleeeease help me
I don't think it got anything to do with selection debugging if you are doing flashing using flashtool. It could be an co-incident that you have bricked. But trust me, Sony (Ericsson) phones are hard to brick (if you didn't touch your boot loader). Try to flash again and you should be getting it back online. Good luck. .
thanke you for request The problem i, that the phon is hangin in the boot rotine so it is frequentli starting the boot process and after 2 seconds itturns of and directly boot again. So you are not able to get a connection to your pc or connect it in Flashmode. But i got th solution by my own if anyone gots the same problem, this ist the way you have to go: 1. Don't Panic 2. Wait until the Accu is down (ore remove it, you have to cut the backplate of accu mounting case. ) now youre abel to start the flash process normaly. 3. use the NEWEST version of flasher 4. there you go
I don't understand what you mean by the solution, but even if the phone is rebooting, you still can go to flash mode without any issues since you have to switch OFF the phone in order to enter flash mode. I don't know whether you are getting it wrongly in the first place! Anyway, if you have resolved the issue and the phone is working normally, good. Enjoy
